http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
Optical Measurements, Modeling, and Metrology, Volume 5
Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics
Optical Measurements, Modeling and, Metrology represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference & Exposition on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials; MEMS and Nanotechnology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.
3D Structures of Alloys and Nanoparticles Observed by Electron Tomography (40 minute presentation) -- Damage Characterization in Dual-phase Steels Using X-ray Tomography -- In-situ Synchrotron-radiation Computed Laminography Observation of Ductile Fracture -- Understanding the Mechanical Behaviour of a High Manganese TWIP Steel by the Means of in Situ 3D X ray Tomography -- Mechanical Properties of Monofilament Entangled Materials -- Caracterisation of Mechanical Properties of Cellular Ceramic Materials Using X-ray Computed Tomography -- Multiaxial Stress State Assessed by 3D X-ray Tomography on Semi-crystalline -- Polymers -- Effect of Porosity on the Fatigue Life of a Cast al Alloy -- Fatigue Mechanisms of Brazed Al-Mn Alloys Used in Heat Exchangers -- Three Dimensional Confocal Microscopy Study of Boundaries between Colloidal Crystals -- Scale Independent Fracture Mechanics -- Keynote Presentation (40 minutes) -- Consistent Embedding: A Theoretical Framework for Multiscale Modeling -- Analysis of Crystal Rotation by Taylor Theory -- Keynote Presentation (40 minutes) -- Numerical Solution of the Walgraef-aifantis Model for Simulation of Dislocation Dynamics in Materials Subjected to Cyclic Loading -- Photoelastic Determination of Boundary Condition for Finite Element Analysis -- Discussion on Hybrid Approach to Determination of Cell Elastic Properties -- Mesh Refinement for Inverse Problems With Finite Element Models -- Assessment of Inverse Procedures for the Identification of Hyperelastic Material Parameters -- Digital Image Correlation Through a Rigid Borescope -- Scale Independent Approach to Strength Physics and Optical Interferometry -- Keynote Presentation (40 minutes) -- Optical Techniques That Measure Displacements: A Review of the Basic Principles -- Studying Phase Transformations in a Shape Memory Alloy With Full-field Measurement Techniques -- Correlation between Mechanical Strength and Surface Conditions of Laser Assisted Machined Silicon Nitride -- Analysis of Speckle Photographs by Subtracting Phase Functions of Digital Fourier Transforms -- Measurement of Residual Stresses in Diamond Coated Substrates Utilizing Coherent Light Projection Moiré Interferometry -- Automatic Acquisition and Processing of Large Sets of Holographic Measurements in Medical Research -- Adaptative Reconstruction Distance in a Lensless Digital Holographic Otoscope -- 3D Shape Measurements With High-speed Fringe Projection and Temporal Phase Unwrapping -- Measuring Local Mechanical Properties of Membranes Applying Coherent Light Projection Moiré Interferometry -- Experimental Analysis of Foam Sandwich Panels With Projection Moiré -- Panoramic Stereo DIC-based Strain Measurement on Submerged Objects -- Advances in the Measurement of Surfaces Properties Utilizing Illumination at Angles Beyond Total Reflection -- Filters with Noise/Phase Jump Detection Scheme for Image Reconstruction -- An Instantaneous Phase Shifting ESPI System for Dynamic Deformation Measurement -- Development of Linear LED Device for Shape Measurement by Light Source Stepping Method -- Calibration Method for Strain Measurement Using Multiple Cameras in Digital Holography -- Performance Assessment of Strain Measurement With an Ultra High Speed Camera -- Rigid Body Correction Using 3D Digital Photogrammetry for Rotating Structures -- Development of Sampling Moire Camera for Landslide Prediction by Small Displacement Measurement -- Energy Dissipation in Impact Absorber -- Mechanics Behind 4D Interferometric Measurement of Biofilm Mediated Tooth Decay -- Validating Road Profile Reconstruction Methodology Using ANN Simulation on -- Experimental Data -- Electro-optical Property of Sol-gel-derived PLZT7/30/70 Thin Films -- Decoupling six Effective Parameters of Anisotropic Optical Materials Using Stokes Polarimetry -- Measurement of Creep Deformation in Stainless Steel Welded Joints -- Thermal Deformation Measurement in Thermoelectric Coolers by ESPI and DIC Method -- Structural Health Monitoring Using Digital Speckle Photography -- Determining the Strain Distribution in Bonded and Bolted/Bonded Composite Butt Joints Using the Digital Image Correlation Technique and Finite Element Methods -- Improved Spectral Approach for Continuous Displacement Measurements From Digital Images -- Experimental Testing (2D DIC) and FE Modelling of T-stub Model.
Appl.Mathematics/Computational Methods of Engineering
Characterization and Evaluation of Materials
Conference Proceedings of the Society for Experimental Mechanics Series