http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings
The Minerals, Metals Materials Society, &.
XXII, 1731 p. 931 illus. online resource.
This collection features papers presented at the 146th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.
Part 1. 2018 Symposium on Functional Nanomaterials: Discovery and Integration of Nanomaterials -- 2-D Nanosheets and Rod-like WO3 Obtained via Chemical Precipitation Method for Detecting Formaldehyde -- Electrochemical Fabrication of micro/nanoporous Copper Film by Electrosynthesis-dealloying of Cu-Zn Alloy in Eutectic Deep Solvent -- Electrosynthesis of CuNP'S from E-Waste -- Experimental Investigation of the Effect of ZnO-Citrus Sinensis Nano-additive on the Electrokinetic Deposition of Zinc on Mild Steel in Acid -- Obtaining of Iron Nanoparticles (Fe NP's) for Treatment of Water Contaminated with As -- Synthesis of Gold Nanoparticles Using the Extract of Sedum Praeltum and its Deposition on a Ceramic Substrate -- Part 2. Accident Tolerant Fuels for Light Water Reactor -- Effects of Ce Addition on the Microstructure and Mechanical Properties of Accident-tolerance Fe-Cr-Al Fuel Cladding Materials -- Part 3. Additive Manufacturing of Metals: Fatigue and Fracture -- Evaluation of The Mechanical Properties of 15Cr-5Ni Stainless Steel Produced by Direct Metal Laser Sintering -- Creep and Thermomechanical Fatigue of Functionally Graded Inconel 718 Produced by Additive Manufacturing -- Part 4. Additive Manufacturing: Building the Pathway towards Process and Material Qualification -- Defect Detection in LENS AM Using In Situ Thermal Camera Process Monitoring -- Part 5. Advanced High-strength Steels -- Studying Hydrogen Embrittlement in Nano-twinned Polycrystalline Fe-12.5Mn-1.2C Austenitic Steel -- Non-metallic Inclusion and their Effect on Fatigue Strength for CAS-hardened Carbon Steel in Gears -- Influence of Austenitizing Temperature and Time on Microstructure and Mechanical Properties of an YP460 Grade Crack Arrest Steel -- The Evolution of Microstructure of an High Ni HSLA X100 Forged Steel Slab by Thermomechanical Controlled Processing -- Effects of Matrix Microstructure on the Nanoscale Precipitation and Precipitation Strengthening in an Ultra-high Strength Steel -- The Technology Study of Silicon Reduction of Chromite Powder in Microwave Field -- Part 6. Advanced Magnetic Materials for Energy and Power Conversion Applications -- Influence of Co-doping on the Crystal Structure, Magnetocaloric Properties and Elastic Moduli of the La(Fe,Si)13 Compound -- Part 7. Advanced Real Time Optical Imaging -- Mass Transfer in High-temperature Laser Confocal Microscopy -- Current State Art of Double Hot Thermocouple Technology-Novel Way for the Study of Mold Flux High-temperature Properties -- Part 8. Algorithm Development in Materials Science and Engineering -- A Dislocation-based Finite Element Modelling of Hydrogen Embrittlement in High-strength Steel Alloys -- Part 9. Biodegradable Materials for Medical Applications -- Comparative Study on Corrosion Behavior WE33 in Immersion and Polarization Influenced by Heat Treatment -- Metal Injection Molding (MIM) of Mg-alloys for Biomedical Applications -- Microstructure and Mechanical Properties of Mg-Gd Alloys as Biodegradable Implant Materials -- Study on Polylactide-coconut Fibre for Biomedical Applications -- Visualisation of Implant Failure by Synchrotron Tomography -- Part 10. Biological Materials Science -- 3D Full-field Mechanical Measurement of Shoulder Bones under Implant Loading -- The Influence of Plastic Deformation Mechanisms on the Collagen Formation in Osteoblast Cells -- Part 11. Bulk Metallic Glasses XV -- Probabilistic Modelling and Simulation of Microstructural Evolution in Zr Based Bulk Metallic Glass Matrix Composites during Solidification -- Part 12. Computational Design and Simulation of Materials (CDSM 2018): Atomistic Simulations -- The Adhesion Force in Nano-contact during Approaching and Retrieving Processes -- Atomistic Simulations of Carbon Diffusion and Segregation in a-Iron Grain Boundaries -- Part 13. Computational Design and Simulation of Materials (CDSM 2018): Meso/Macroscale Simulations -- Microstructure Prediction for TMW-4M3 during Heat Treatment -- Study on the Effects of Contact Pressure and Process Parameters on the Casting-mold Interfacial Heat Transfer in Squeeze Casting -- Part 14. Computational Design and Simulation of Materials (CDSM 2018): Computational Design of Materials -- Study on the Effect of Applied Pressure on Directional Dendritic Growth by In-situ Observation -- Modeling of Solute-dependent Fluidity and Hot Tearing Sensitivity of Conductive Aluminum Alloys -- Coupling Void Coalescence Criteria in Finite Element Models: Application to Tensile Test -- Design of a New Multi-element Beta Titanium Alloy Based on D-electron Method -- Part 15. Computational Materials Science and Engineering for Nuclear Energy -- Effects of Oxygen on the Density of States and Elastic Properties of Hafnium-First Principles Calculations -- Morphological Study of Dispersion Phases in Heterogenous Waste Form Materials for Efficient Nuclear Waste Containment -- Part 16. Computational Thermodynamics and Kinetics -- Compare the Energies of Different Oxofuoraluminium Structures in Aluminium Production Process -- Manganese Influence on Equilibrium Partition Coefficient and Phase Transformation in Peritectic Steel -- Mathematical Modeling on the Fluid Flow and Desulfurization during KR Hot Metal Treatment -- Part 17. Coupling Experiments and Modeling to Understand Plasticity and Failure -- In-situ Characterization of Microstructural Damage in QP980 Steel -- Part 18. Deformation and Damage Mechanisms in High Temperature Ni, Co and Fe-based Superalloys -- Prediction of Incipient Melting Map and Features of Ni-base Superalloys Using Molecular Orbital Method -- Part 19. Dynamic Behavior of Materials VIII -- Mechanical Properties and Shear Localization of High Entropy Alloy CoCrFeMnNi Prepared by Powder Metallurgy -- Effect of Phase Transformation on High Temperature Dynamic Flow Stresses of CP-Ti -- Shock-induced Mechanical Response and Substructural Evolution of Ti-6Al-4V Alloy -- The Use of Circumferentially Notched Tension Specimen for Fracture Toughness Assessment of High Strength Steels -- A Low-Cost, Laboratory-Scale Method to Identify Regions of Microstructural Changes in Response to Dynamic Loading Conditions -- Part 20. Environmentally Assisted Cracking: Theory and Practice -- Environment Induced Degradation in Maraging Steel Grade 18Ni1750 -- Part 21. Fatigue in Materials: Fundamentals, Multiscale Modeling and Prevention -- Thermal Fatigue Behavior of High Cr Roller Steel -- Influence of Cold Spray on the Enhancement of Corrosion Fatigue of the AZ31B Cast Mg Alloy -- Part 22. Fracture: 65 Years after the Weibull Distribution and the Williams Singularity -- High Temperature Cracking Damage of Calcium Aluminate Cements -- On the Experimental Evaluation of the Fracture Toughness of Shape Memory Alloys -- Part 23. Frontiers in Solidification Science and Engineering -- Inoculation in Lab Scale Low Alloyed Steel Castings -- Phase-field Modelling of Intermetallic Solidification -- Analysis of Formability of Glassy Alloys by Surface Heating under Convective Conditions -- Study on the Formation and Control of TiN Inclusion in Mushy Zone for High Ti Microalloyed Steel -- Part 24. General Poster Session -- Additive Manufacturing of Epoxy Resin Matrix Reinforced with Magnetic Particles -- Admixture Optimization in Concrete Using Superplasticizers -- Influence of Cold Spray on the Microstructure and Residual Stress of Resistance Spot Welded Steel-Mg -- Part 25. High Entropy Alloys VI -- Development of Oxidation Resistant Refractory High Entropy Alloys for High Temperature Applications: Recent Results and Development Strategy -- First-principles Calculations of Stacking Fault Energies in Quinary High-entropy Alloy Systems -- Synthesis of FeCrVNbMn High Entropy Alloy by Mechanical Alloying and Study of their Microstructure and Mechanical Properties -- Part 26. Integrative Materials Design III: Performance and Sustainability -- Magnesium Based Metal Matrix Nanocomposites - Processing and Properties -- Part 27. Materials and Fuels for the Current and Advanced Nuclear Reactors VII -- Investigation of Tin as a Fuel Additive to Control FCCI -- Part 28. Mechanical Behavior at the Nanoscale IV -- Mechanical Properties of Rapidly Solidified Ni5Ge3 Intermetallic -- Part 29.
Mechanical Characteristics and Application Properties of Metals and Non-metals for Technology: An EPD Symposium in Honor of Donato Firrao -- Production of Cu2O Powder Using Electrodeposition Method -- Alumina Feeding System Changes in Aluminum Electrochemical Cell with D18 Technology for Energy Efficiency (Case Study: Almahdi- Hormozal Aluminum Smelter) -- Hot Ductility of X70 Pipeline Steel in Continuous Casting -- Ductile Fracture Assessment of Hot Isostatically Pressed Stainless Steel Using 3D X-ray Computed Tomography -- Thermo-Calc of the Phase Diagrams of the Nb-N System -- Part 30. Multi-material Additive Manufacturing: Processing and Materials Design -- Development of Novel Squeeze Cast High Tensile Strength Al-Si-Cu-Ni-Sr Alloys -- Part 31. Nanocomposites V: Structure-Property Relationships in Nanostructured Materials -- Carbon Nanocomposite for Reliable Seal Applications in High- temperature, High-pressure, Corrosive Environments -- The Dielectric Behavior in Reduced Graphene Oxide /Polymer Composites with a Segregated Structure -- Part 32. Phase Transformations and Microstructural Evolution -- Solid State Phase Transformation Mechanism in High Carbon Steel under Compressive Load and with Varying Cr Percent -- Microstructure Characterization of Aged Heat Resistant Steels -- Sublimation and Self Freezing of Planar Surfaces in Rarefied Atmospheres -- Effect of Precipitation on Creep Properties of Ferritic Steels -- Microstructural Evolution of a New Beta Titanium Alloy during the Beta Annealing, Slow Cooling and Aging Process -- Part 33. Powder Metallurgy of Light, Reactive and Other Non-ferrous Metals -- A Review of the Preparation Methods of WC Powders -- Influence of Hot Ro.
edited by & The Minerals, Metals Materials Society.
Characterization and Evaluation of Materials