Experimental and Applied Mechanics, Volume 6 Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics /
Experimental and Applied Mechanics represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference & Exposition on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also inc...
| Συγγραφή απο Οργανισμό/Αρχή: | |
|---|---|
| Άλλοι συγγραφείς: | |
| Μορφή: | Ηλεκτρονική πηγή Ηλ. βιβλίο |
| Γλώσσα: | English |
| Έκδοση: |
New York, NY :
Springer New York : Imprint: Springer,
2011.
|
| Σειρά: | Conference Proceedings of the Society for Experimental Mechanics Series,
|
| Θέματα: | |
| Διαθέσιμο Online: | Full Text via HEAL-Link |
Πίνακας περιεχομένων:
- A Rocking Spalling Test to Characterise the Crack Speed in Brittle Materials
- Crack Growth Behavior in Preloaded Metallic Nested-angle Plates Under Flight Load Spectrum
- Experimental and Finite Element Analysis (FEM) of Bioceramics
- Damage Analysis of the Ceramic Reinforced Steel Matrix Composites Sheets: Experimental and Numerical Study
- Dynamic Mechanical Properties of Polymeric Materials Aged in PEM Fuel Cell Conditions
- "Mechanical Characterization and Modeling
- of Solid Oxide Fuel Cells and Stacks"
- The Impulse Imparted Upon Monolithic Metal Plates due to Blast Loading
- Investigation in Shear Behavior of Intermetallic Composites Using V-notched Beam Test Method
- The Influence of Sample Thickness on the DCDC Fracture Test
- Analysis of Hysteresis Damage Accumulation and the Effect on Fatigue Life
- Fatigue Improvement of Welded Elements by Ultrasonic Impact Peening
- Delamination Between Functionalized Silicon Surfaces
- Failure and Fracture Behavior of Brittle Polymer Foam
- Crack Growth in Three-point Bend Specimens Made of Polymeric Foams
- Reliability Evaluation of Conformal Coatings for Tin Whisker Failure Mitigation in Accelerated Testing Conditions
- Investigation of Manganese Cobalt Oxide (MCO) Coatings on Fuel Cell Interconnects
- Extracting Crack-tip Field Parameters in Anisotropic Elastic Solids From Full-field Measurements Using Least-squares Method and Conservation Integrals
- Velocity Measuring Approaches for the Determination of Ballistic Limits of GLARE 5 Fiber-metal Laminate Plates
- Underwater Explosive Loading of Curved Composite Plates: Experimental and Computational Comparisons
- Adhesion Strength in Metal/Polymer Composites
- Modal-parameter Identification From Nonstationary Ambient Vibration Data
- High-speed Digital Image Correlation Measurements of Random Nonlinear Dynamic Response
- Experimental Modal Analysis of an Inflatable, Self-rigidizing Toroidal Satellite Component
- Selective Excitation Using Phase Shifted Ultrasound Radiation Force From Focused Transducers in air
- The Steelpan as a Tool to Incite Interest in Engineering Education
- Non-contacting Strain Measurement in Dynamic Tensile Testing
- Quantification of Micro-crack Density for Fiber Based Composites
- Dynamic Shear Response of a Polymer Bonded Explosive Using a Modified Hopkinson bar Apparatus
- Shock Testing Accelerometers With a Hopkinson Pressure bar
- Effect of Residual Stresses on Spallation of the Film Under Impact by Coated Bullet
- Fracture Testing of Simulated FRP Repairs
- Hybrid Nano/Microcomposites for Enhanced Damage Tolerance
- Drop-weight Impact Studies of GLARE 5 Fiber-metal Laminates
- Finite Element Modal Analysis of an Inflatable, Self-rigidizing Toroidal Satellite Component
- Experimental and Finite Element Modal Analysis of the Flexible Wings of Micro Munition Vehicles
- Numerical Analysis Study of the Failure Mechanism of Transparent Materials During low Velocity Impact Used in Protective Systems
- Effects of End Restraint on Eyebar Behavior in Bridges
- Three-dimensional Mechanics of Microcellular Solids Using Scanning Confocal Microscopy
- Characterization of the Mechanical Properties of Surface Nanocrystallized Materials
- Variation of Compression of Seals in PEM Fuel Cells
- Neutron Emission Evidences in Natural Materials Under Monotonic, Cyclic, and Vibrational Loading
- Acoustic Emission and Electrical Properties of Quasi-brittle Materials Under Compression
- Temperature Effect on Tensile Testing of Hybrid and Non-hybrid Composites
- Studies on Fracture Performance of Bio-fiber-silica-glass Fiber Reinforced Epoxy Hybrid Composites
- Mechanical Behavior of Bio-inspired Sandwich Composites
- Characterization of Mechanical Behavior of Kevlar 49 Fabrics
- Identification of the Tensile Properties of Composite Material Under Variable Strain Rates
- Compression/Shear Response of Honeycomb Core
- Light Guide Component in Efficiency Enhancement of DSSC
- Sign Support Structures Tested by means of Guided Waves
- Reliability-based Design of Structures Under Seismic Loading: Application to Timber Structures
- Progress in Developing a Standard for Dynamic Strain Analysis
- Polymers in Biaxial States of Stress at Various Loading Rates
- Parametric Study to Optimize Aluminum Shell Structure Under Various Conditions
- A Force Domain Analog-to-Digital Converter Applied in Micro and Nanoscale Tensile Tests
- Distributed Fiber Optic Strain Measurement Using Rayleigh Scatter in Composite Structures
- Diamond Sensors With Silicon Technologies for Sensing in Harsh Environments
- The Influence of Restraint Systems on Panel Behavior
- Burst Strength of Pipeline Test Specimens Containing Longitudinal or Circumferential Corrosion Defects
- A Comparative Analysis of Two Full-scale MD-500 Helicopter Crash Tests
- Structural Integrity Assessment of Blade's Subcomponents Using Acoustic Emission Monitoring
- Measurement of Cohesive Parameters of Crazes in Polystyrene Films
- Delamination Growth Using Cohesive Zone Model for Adhesive Bonding Under Compression
- Simulation of Stable Tearing Crack Growth Using the Cohesive Zone Model Approach
- Experimental and Numerical Results for Diffusion Bonded Joints
- Modeling of Stable Tearing With Crack Tunneling in Specimens of Different Thickness
- Fatigue Modeling of Collagenous Soft Tissues
- An in-situ Experimental-numerical Approach for Interface Delamination Characterization
- Interface Integrity in Stretchable Electronics
- A Miniaturized Contactless Pure-bending Device for in-situ SEM Failure Analysis
- Study of Propagation of a Pre-existing Crack Under Different Boundary Conditions for Fatigue Loading
- Stochastic Model for Estimation of Probability-confidence Bounded a-N Curves
- Waveforms and Frequency Spectra of Elastic Emissions due to Macrofracture in Solids
- Failure Characteristics of Spot Welds of AHSS Under Quasi-static Conditions
- Characterization of Adaptive Reinforced Concrete Structures
- Bulk Waves for the Nondestructive Inspection of Immersed Structures
- Assault Riffle Bullet-experimental Characterization and Computer (FE) Modeling.
