TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings
This collection features papers presented at the 146th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.
| Συγγραφή απο Οργανισμό/Αρχή: | |
|---|---|
| Άλλοι συγγραφείς: | |
| Μορφή: | Ηλεκτρονική πηγή Ηλ. βιβλίο |
| Γλώσσα: | English |
| Έκδοση: |
Cham :
Springer International Publishing : Imprint: Springer,
2019.
|
| Έκδοση: | 1st ed. 2019. |
| Σειρά: | The Minerals, Metals & Materials Series,
|
| Θέματα: | |
| Διαθέσιμο Online: | Full Text via HEAL-Link |
Πίνακας περιεχομένων:
- Part 1. 2018 Symposium on Functional Nanomaterials: Discovery and Integration of Nanomaterials
- 2-D Nanosheets and Rod-like WO3 Obtained via Chemical Precipitation Method for Detecting Formaldehyde
- Electrochemical Fabrication of micro/nanoporous Copper Film by Electrosynthesis-dealloying of Cu-Zn Alloy in Eutectic Deep Solvent
- Electrosynthesis of CuNP'S from E-Waste
- Experimental Investigation of the Effect of ZnO-Citrus Sinensis Nano-additive on the Electrokinetic Deposition of Zinc on Mild Steel in Acid
- Obtaining of Iron Nanoparticles (Fe NP's) for Treatment of Water Contaminated with As
- Synthesis of Gold Nanoparticles Using the Extract of Sedum Praeltum and its Deposition on a Ceramic Substrate
- Part 2. Accident Tolerant Fuels for Light Water Reactor
- Effects of Ce Addition on the Microstructure and Mechanical Properties of Accident-tolerance Fe-Cr-Al Fuel Cladding Materials
- Part 3. Additive Manufacturing of Metals: Fatigue and Fracture
- Evaluation of The Mechanical Properties of 15Cr-5Ni Stainless Steel Produced by Direct Metal Laser Sintering
- Creep and Thermomechanical Fatigue of Functionally Graded Inconel 718 Produced by Additive Manufacturing
- Part 4. Additive Manufacturing: Building the Pathway towards Process and Material Qualification
- Defect Detection in LENS AM Using In Situ Thermal Camera Process Monitoring
- Part 5. Advanced High-strength Steels
- Studying Hydrogen Embrittlement in Nano-twinned Polycrystalline Fe-12.5Mn-1.2C Austenitic Steel
- Non-metallic Inclusion and their Effect on Fatigue Strength for CAS-hardened Carbon Steel in Gears
- Influence of Austenitizing Temperature and Time on Microstructure and Mechanical Properties of an YP460 Grade Crack Arrest Steel
- The Evolution of Microstructure of an High Ni HSLA X100 Forged Steel Slab by Thermomechanical Controlled Processing
- Effects of Matrix Microstructure on the Nanoscale Precipitation and Precipitation Strengthening in an Ultra-high Strength Steel
- The Technology Study of Silicon Reduction of Chromite Powder in Microwave Field
- Part 6. Advanced Magnetic Materials for Energy and Power Conversion Applications
- Influence of Co-doping on the Crystal Structure, Magnetocaloric Properties and Elastic Moduli of the La(Fe,Si)13 Compound
- Part 7. Advanced Real Time Optical Imaging
- Mass Transfer in High-temperature Laser Confocal Microscopy
- Current State Art of Double Hot Thermocouple Technology-Novel Way for the Study of Mold Flux High-temperature Properties
- Part 8. Algorithm Development in Materials Science and Engineering
- A Dislocation-based Finite Element Modelling of Hydrogen Embrittlement in High-strength Steel Alloys
- Part 9. Biodegradable Materials for Medical Applications
- Comparative Study on Corrosion Behavior WE33 in Immersion and Polarization Influenced by Heat Treatment
- Metal Injection Molding (MIM) of Mg-alloys for Biomedical Applications
- Microstructure and Mechanical Properties of Mg-Gd Alloys as Biodegradable Implant Materials
- Study on Polylactide-coconut Fibre for Biomedical Applications
- Visualisation of Implant Failure by Synchrotron Tomography
- Part 10. Biological Materials Science
- 3D Full-field Mechanical Measurement of Shoulder Bones under Implant Loading
- The Influence of Plastic Deformation Mechanisms on the Collagen Formation in Osteoblast Cells
- Part 11. Bulk Metallic Glasses XV
- Probabilistic Modelling and Simulation of Microstructural Evolution in Zr Based Bulk Metallic Glass Matrix Composites during Solidification
- Part 12. Computational Design and Simulation of Materials (CDSM 2018): Atomistic Simulations
- The Adhesion Force in Nano-contact during Approaching and Retrieving Processes
- Atomistic Simulations of Carbon Diffusion and Segregation in a-Iron Grain Boundaries
- Part 13. Computational Design and Simulation of Materials (CDSM 2018): Meso/Macroscale Simulations
- Microstructure Prediction for TMW-4M3 during Heat Treatment
- Study on the Effects of Contact Pressure and Process Parameters on the Casting-mold Interfacial Heat Transfer in Squeeze Casting
- Part 14. Computational Design and Simulation of Materials (CDSM 2018): Computational Design of Materials
- Study on the Effect of Applied Pressure on Directional Dendritic Growth by In-situ Observation
- Modeling of Solute-dependent Fluidity and Hot Tearing Sensitivity of Conductive Aluminum Alloys
- Coupling Void Coalescence Criteria in Finite Element Models: Application to Tensile Test
- Design of a New Multi-element Beta Titanium Alloy Based on D-electron Method
- Part 15. Computational Materials Science and Engineering for Nuclear Energy
- Effects of Oxygen on the Density of States and Elastic Properties of Hafnium-First Principles Calculations
- Morphological Study of Dispersion Phases in Heterogenous Waste Form Materials for Efficient Nuclear Waste Containment
- Part 16. Computational Thermodynamics and Kinetics
- Compare the Energies of Different Oxofuoraluminium Structures in Aluminium Production Process
- Manganese Influence on Equilibrium Partition Coefficient and Phase Transformation in Peritectic Steel
- Mathematical Modeling on the Fluid Flow and Desulfurization during KR Hot Metal Treatment
- Part 17. Coupling Experiments and Modeling to Understand Plasticity and Failure
- In-situ Characterization of Microstructural Damage in QP980 Steel
- Part 18. Deformation and Damage Mechanisms in High Temperature Ni, Co and Fe-based Superalloys
- Prediction of Incipient Melting Map and Features of Ni-base Superalloys Using Molecular Orbital Method
- Part 19. Dynamic Behavior of Materials VIII
- Mechanical Properties and Shear Localization of High Entropy Alloy CoCrFeMnNi Prepared by Powder Metallurgy
- Effect of Phase Transformation on High Temperature Dynamic Flow Stresses of CP-Ti
- Shock-induced Mechanical Response and Substructural Evolution of Ti-6Al-4V Alloy
- The Use of Circumferentially Notched Tension Specimen for Fracture Toughness Assessment of High Strength Steels
- A Low-Cost, Laboratory-Scale Method to Identify Regions of Microstructural Changes in Response to Dynamic Loading Conditions
- Part 20. Environmentally Assisted Cracking: Theory and Practice
- Environment Induced Degradation in Maraging Steel Grade 18Ni1750
- Part 21. Fatigue in Materials: Fundamentals, Multiscale Modeling and Prevention
- Thermal Fatigue Behavior of High Cr Roller Steel
- Influence of Cold Spray on the Enhancement of Corrosion Fatigue of the AZ31B Cast Mg Alloy
- Part 22. Fracture: 65 Years after the Weibull Distribution and the Williams Singularity
- High Temperature Cracking Damage of Calcium Aluminate Cements
- On the Experimental Evaluation of the Fracture Toughness of Shape Memory Alloys
- Part 23. Frontiers in Solidification Science and Engineering
- Inoculation in Lab Scale Low Alloyed Steel Castings
- Phase-field Modelling of Intermetallic Solidification
- Analysis of Formability of Glassy Alloys by Surface Heating under Convective Conditions
- Study on the Formation and Control of TiN Inclusion in Mushy Zone for High Ti Microalloyed Steel
- Part 24. General Poster Session
- Additive Manufacturing of Epoxy Resin Matrix Reinforced with Magnetic Particles
- Admixture Optimization in Concrete Using Superplasticizers
- Influence of Cold Spray on the Microstructure and Residual Stress of Resistance Spot Welded Steel-Mg
- Part 25. High Entropy Alloys VI
- Development of Oxidation Resistant Refractory High Entropy Alloys for High Temperature Applications: Recent Results and Development Strategy
- First-principles Calculations of Stacking Fault Energies in Quinary High-entropy Alloy Systems
- Synthesis of FeCrVNbMn High Entropy Alloy by Mechanical Alloying and Study of their Microstructure and Mechanical Properties
- Part 26. Integrative Materials Design III: Performance and Sustainability
- Magnesium Based Metal Matrix Nanocomposites - Processing and Properties
- Part 27. Materials and Fuels for the Current and Advanced Nuclear Reactors VII
- Investigation of Tin as a Fuel Additive to Control FCCI
- Part 28. Mechanical Behavior at the Nanoscale IV
- Mechanical Properties of Rapidly Solidified Ni5Ge3 Intermetallic
- Part 29.
- Mechanical Characteristics and Application Properties of Metals and Non-metals for Technology: An EPD Symposium in Honor of Donato Firrao
- Production of Cu2O Powder Using Electrodeposition Method
- Alumina Feeding System Changes in Aluminum Electrochemical Cell with D18 Technology for Energy Efficiency (Case Study: Almahdi- Hormozal Aluminum Smelter)
- Hot Ductility of X70 Pipeline Steel in Continuous Casting
- Ductile Fracture Assessment of Hot Isostatically Pressed Stainless Steel Using 3D X-ray Computed Tomography
- Thermo-Calc of the Phase Diagrams of the Nb-N System
- Part 30. Multi-material Additive Manufacturing: Processing and Materials Design
- Development of Novel Squeeze Cast High Tensile Strength Al-Si-Cu-Ni-Sr Alloys
- Part 31. Nanocomposites V: Structure-Property Relationships in Nanostructured Materials
- Carbon Nanocomposite for Reliable Seal Applications in High- temperature, High-pressure, Corrosive Environments
- The Dielectric Behavior in Reduced Graphene Oxide /Polymer Composites with a Segregated Structure
- Part 32. Phase Transformations and Microstructural Evolution
- Solid State Phase Transformation Mechanism in High Carbon Steel under Compressive Load and with Varying Cr Percent
- Microstructure Characterization of Aged Heat Resistant Steels
- Sublimation and Self Freezing of Planar Surfaces in Rarefied Atmospheres
- Effect of Precipitation on Creep Properties of Ferritic Steels
- Microstructural Evolution of a New Beta Titanium Alloy during the Beta Annealing, Slow Cooling and Aging Process
- Part 33. Powder Metallurgy of Light, Reactive and Other Non-ferrous Metals
- A Review of the Preparation Methods of WC Powders
- Influence of Hot Ro.
