Light Metals 2019
.
| Συγγραφή απο Οργανισμό/Αρχή: | |
|---|---|
| Άλλοι συγγραφείς: | |
| Μορφή: | Ηλεκτρονική πηγή Ηλ. βιβλίο |
| Γλώσσα: | English |
| Έκδοση: |
Cham :
Springer International Publishing : Imprint: Springer,
2019.
|
| Έκδοση: | 1st ed. 2019. |
| Σειρά: | The Minerals, Metals & Materials Series,
|
| Θέματα: | |
| Διαθέσιμο Online: | Full Text via HEAL-Link |
Πίνακας περιεχομένων:
- Part 1. Alumina & Bauxite
- Roasting Pretreatment- low Temperature Digestion Method for Comprehensive Utilization of High-sulfur Bauxite
- Industrial Experience of Sinter Hydro-chemical Processing at Bogoslovsk Alumina Refinery
- Effect of Sintering Conditions on the Stability of 946-2CaO·SiO2 in High Sodium Carbonate Solution
- Research on Impurity Removal of Low Grade Bauxite
- Study on the Structure and Generation Mechanism of Intermediate (6AlO-OH) in Decomposition Process of Sodium Aluminate Solutions
- The Properties of Superfine ATH Precipitated by Carbonation Method
- Effect of Organic Impurity on Seed Precipitation in Sodium Aluminate Solution
- Fitness-for-service Assessment and Re-rating of Flawed Alumina Feeding Vessels
- Miniplant Tests of HCl Technology of Alumina Production
- Development and Usage of Detailed Models of Technology at RUSAL Alumina Refineries
- Features of Pseudoboehmite from Alumina Production
- Digital Transformation in Alumina Refining
- Thermodynamics Analysis on Process of Pelletizing Chlorination of Fly Ash
- Research on Alumina Preparation from Aluminium Chloride Solution by Electrolysis Process
- How Digitalization Can Further Improve Plant Performance and Product Quality - Outotec Pretium Advisory Tool for Alumina Calcination
- Expertimental Investigation on Reduction of Cast Iron from Bayer Red Mud and Laterite Nickel
- Analyzing the Bauxite Residue Amendment through the Addition of Ca and Mg Hydroxides Followed by Carbonation
- Comprehensive Utilization of Red Mud: Current Research Status and a Possible Way Forward for Non-hazardous Treatment
- Alumina, Iron and Titanium Extracting from Bauxite Residue with Low Lime Sinter Method
- Developing New Process for Selective Extraction of Rare Earth Elements from Bauxite Residue Based on Functionalized Ionic Liquids
- Effects of Reductive Roasting with Sodium Salts on Leaching Behavior of Non-ferrous Elements in Bauxite Ore Residue
- Specific Features of Scandium Behavior during Sodium Bicarbonate Leaching of Red Mud
- Flotation Separation of Pyrite from Refractory High-sulfur Bauxite
- Research on the Desulfurization of High Sulfur Bauxite
- Research on the Interaction between 1-butyl-2-mercaptobenzimidazole and Pyrite
- Flotation of Low-grade Bauxite Using Modified Humics as Depressant
- Research on the Adsorption of Humic Acid on Pyrite Surface
- Experimental Investigation on Desiliconization of Low-grade Bauxite by Flotation Process
- The Impact of Backwater Iron Ions on Bauxite Flotation
- Part 2. Aluminum Alloys, Processing and Characterization
- Grain Boundary Precipitation and Fracture Behavior of Al-Cu-Li Alloys
- Comparison of Texture and Surface Finish Evolution during Single Point Incremental Forming and Formability Testing of AA 7075
- Understanding the Co-precipitation Mechanisms of Al3(Sc, Zr) with Strengthening Phases in Extruded Al-Cu-Li Model Alloys
- Determining a Retrogression Heat Treatment to Apply during Warm Forming of a High Strength AA7075 Sheet Material
- Development of High-strength and High-electrical-conductivity Aluminum Alloys for Power Transmission Conductors
- The Combined Effects of Sr Additions and Heat Treatment on the Microstructure and Mechanical Properties of High Pressure Die Cast A383 Alloy
- Influence of Additional Elements (Si Ti and B) on the Castability, Corrosion and Mechanical Properties of A201 Alloys
- Effect of Ni Addition on the Solidification Process and Microstructure of Al-12%Si-4%Cu-1.2%Mn-x%Ni Heat-resistant Alloys
- Phase Formation of Monotectic Al-In and Al-Ga-In Alloys and Implications Thereof
- Investigations on Pb-free 6000 Series Aluminum Alloy for Machining Applications
- Optimization in Novel Partial-solid High Pressure Aluminum Die Casting by Taguchi Method
- Application of the Hot Stamping Process to Aluminum Alloy Structural Components
- Failure of 5000 and 6000 Series Aluminum Alloys in Modular Wastewater Treatment Aeration Tanks
- Grain Refinement of Al-Si-Mg Cast Alloys by Al3Ti3B Master Alloy
- Improving Bendability of Al-Mg-Si Alloy Sheet by Minor Alloying Element Addition
- Deep Drawing and Anodizing Quality Improvement in AA3003-O Alloy by Optimization of Homogenization, Rolling and Annealing
- Understanding Large-strain Softening of Aluminum in Shear at Elevated Temperature
- Assessments of Sc-containing Ternary Systems Al-Sc-Ti and Al-Sc-Zr within the Thermodynamic Database for Aluminium Alloys, TCAL5
- Multiscale Model for Al-Li Material Processing Simulation under Forging Conditions
- Investigation of Effect of Aging Treatment on Deformation Behavior of Al-Mg-Si Alloy Using Quasi-2D Polycrystalline Sample
- Development of Innovative Aluminum Alloys with High Mechanical Properties
- A General Formulation of Eutectic Silicon Morphology and Processing History
- Evaluation of Hot Tearing Susceptibility of 6000 Series Aluminum Alloys Using Constrained Solidification Test
- In-situ Fitness-for-Service Assessment of Aluminum Alloys Developed for Automotive Powertrain Lightweighting
- Research on the Effect of the Processing Parameters on Susceptibility of Liquation Cracking of Al Alloys during Refilled Friction Stir Spot Welding
- Factors Influencing the Cast Duration of Horizontal Continuous Ingot Casters
- On Si Redistribution during Friction Stir Processing of Cast Al-7%Si-0.4%Mg Alloys
- Equal Channel Angular Pressing of a Newly Developed Precipitation Hardenable Scandium Containing Aluminum Alloy
- Stiffness Improvement Through Alloying Elements in Al Alloys
- Formation Mechanism of Surface Segregation in Heated Mold Continuous Casting Al-Cu Alloy
- Effects of Extrusion and Heat Treatment Conditions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu-Er Alloy
- Effects of Rare Earth Er Additions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy
- Part 3. Aluminum Reduction Technology
- Maximizing Previous Pot Design to Have Higher Capacity
- On the Use of Multivariate Statistical Methods to Detect, Diagnose and Mitigate Abnormal Events in Aluminium Smelters
- Spike Detection Using Advanced Analytics and Data Analysis
- Speed, Agility and Simplicity (SAS) Recovery of Reduction Line-5 in Alba
- Partial Repair and Restart of a Damaged Aluminium Reduction Cell
- Discussion on Alumina Dissolution and Diffusion in Commercial Aluminum Reduction Cell
- Investigation of Alumina Concentration Gradients within Hall-Héroult Electrolytic Bath
- Study of Alumina Dissolution in Cryolitic Bath to the Vertical Soderberg (VSS) Aluminum Production Process
- Impacts of Sodium on Alumina Quality and Consequences for Current Efficiency
- Alucell: A Unique Suite of Models to Optimize Pot Performances and Design
- Anode Bottom Burnout Shape and Velocity Field Investigation in a High Amperage Electrolysis Cell
- CFD Modelling of Alumina Feeding
- Effect of Steel Multi-collector Bars on Current Density and Magnetohydrodynamic Stability in an Aluminum Reduction Cell
- Numerical Simulation Study on Gas Collecting System of 400kA Grade Aluminum Electrolytic Cell
- Study on 3D Full Cell Ledge Shape Calculation and Optimal Design Criteria by Coupled Thermo-flow Model
- The Successful Implementation of Energy Saving Technology Based on Steady Flow and Heat Preservation
- Current Efficiency in Hall-Héroult Cells: The Role of Mass Transfer at the Cathode
- Effects of Current Density on Current Efficiency in Low Temperature Electrolysis with Vertical Electrode Structure
- Relationship between Aluminium Electrolysis Current Efficiency and Operating Condition in Electrolyte Containing High Concentration of Li and K
- Evaluating Effects of Future Shared Mobility and Electrification Trends on Key Intermediate Indicator of Aluminum Transportation Demand: US Vehicle Fleet Size
- Improvement in Smelter Process Analysis through EGA Lab Modernization
- Two-stage Pot Gas Treatment Technology Allowing the Production of Sodium Sulfate
- Improved Abart Gas Treatment and Alumina Handling at the Karmøy Technology Pilot (KTP)
- Alternative Roof-vent Emission Monitoring Method
- SPL: An Update
- Bubble Dispersion States in the Zinc Oxide Desulfurization Injection Blow Tank
- Decision Matrix for Pneumatic Conveying and Distribution of Material
- Very Low Energy Consumption Cell Designs: The Cell Heat Balance Challenge
- APXe Cell Technology: 7 Years of Low Energy Operation
- Development and
- Industrial Application of NEUI600 High Efficiency Aluminum Reduction Cell
- RA-550 Cell Technology: UC RUSAL's New Stage of Technology Development
- DX+ Ultra Industrial Version: Preheat Start up and Early Operation
- Selecting Technology for Achieving 300,000 T/Year - Why Do We Need to Compete Pot Technology?
- AP44 Development at Alma
- EGA New D20+ Technology with Reduced Energy Consumption
- Potline Start up without Anode Effect Frequency
- Thermo-electrical Modeling of an Aluminum Reduction Cell
- Restarting Electrochemical Cell with a Cold Metal (D18 Cell)
- Part 4. Cast Shop Technology
- Root Cause Analysis Findings of a Force 3 Explosion
- Condensation Warning System for Dry Material Storage
- A New Aluminium Crucible Skimmer (ACS) for Smelter Plants - Main Benefits Further to Two Years of Experimentation in Industrial Environment
- Drive-in Feeding of Crucibles for Casting Machine
- In-line Salt Fluxing Process with an FFDTM Industrial Experience with a Box-Type Degasser
- The "Alcoa Filter System": A Cost Effective Solution for Enhanced CFF Performance
- Continuous Centrifugal Casting: A Revolutionary Process for Casting Aluminium Tubes
- Development of a Prototype Unit for Continuous Centrifugal Casting of Aluminium Tubes
- Constellium's R&D on the Use of Power Ultrasound in Liquid Aluminum: An Overview
- Molten Metal Cleanliness: Recent Developments to Improve Measurement Reliability
- On-site Benchmark of LiMCA II vs. LiMCA III for Monitor.
