Characterization of Minerals, Metals, and Materials 2017
This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Coverage is well-rounded from minerals, metals, and materials characterization and developments in extraction to the fabrication and performance of materials. In addition,...
| Συγγραφή απο Οργανισμό/Αρχή: | |
|---|---|
| Άλλοι συγγραφείς: | , , , , , , , , , , , , , |
| Μορφή: | Ηλεκτρονική πηγή Ηλ. βιβλίο |
| Γλώσσα: | English |
| Έκδοση: |
Cham :
Springer International Publishing : Imprint: Springer,
2017.
|
| Σειρά: | The Minerals, Metals & Materials Series,
|
| Θέματα: | |
| Διαθέσιμο Online: | Full Text via HEAL-Link |
Πίνακας περιεχομένων:
- Part 1: Soft Materials
- Charpy Toughness Behavior of Fique Fabric Reinforced Polyester Matrix Composites
- Comparative Analysis of Curaua Fiber Density Using the Geometric Characterization and Pycnometry Technique
- Izod impact tests in polyester matrix composites reinforced with blanket of the malva and jute fibers
- Tensile Behavior of Epoxy Matrix Composites Reinforced With Eucalyptus Fibers
- The dimensional characterization of jute fabric strips for reinforcement in composite polymeric
- Izod Toughness Behavior of Continuous PALF Fibers Reinforced Polyester Matrix Composites
- Mechanical, thermal, morphology and barrier properties of flexible film based on polyethylene-ethylene vinyl alcohol blend reinforced with graphene oxide
- Radiation Effects on Crosslinking of Butyl Rubber Compounds
- Part 2: Clays and Ceramics
- Effect of Skin-Core Hierarchical Structure on Dielectric Constant of Injection Molded and Cast Film Extruded Liquid Crystalline Polymer
- Aging behaviour in Ni0.5CoxMn2.5-xO4 (x=0.5, 0.8 and 1.1) thermistors
- Adsorption of lead from aqueous solutions to bentonite and composite
- Part 3: Electronic, Magnetic, Environmental, and Advanced Materials
- Characterization Of Low-Zinc Electric Arc Furnace Dust
- GAMMA-RADIATION EFFECT ON BIODEGRADABILITY OF SYNTHETIC PLA STRUCTURAL FOAMS PP/HMSPP BASED
- STUDY OF FLEXIBLE FILMS PREPARED FROM PLA/PBAT BLEND AND PLA e-BEAM IRRADIATED AS COMPATIBILIZING AGENT
- Synthesis of ZnO Micro Prisms on Glass Substrates by the Spray Pyrolysis Method
- Part 4: Nano Materials
- Electrical and microstructural investigation of Ni0.5Co0.5Cu0.3Zn0.3Mn1.4O4 temperature sensors
- Enhanced physical properties of thin film nanocomposites
- A study on the size and type of inclusions in Si-Mn combined deoxidated low carbon steel strip
- Effect of Argon Gas Purging of Spark Plasma Sintered ZrB2+SiC Nano-powder Composites
- Part 5: Alloys
- Investigating the Anisotropic Behaviour of Lean Duplex Stainless Steel 2101
- MICROSTRUCTUAL INVESTIGATION AND IMPACT TESTING OF ADDITIVE MANUFACTURED TI-6AL-4V
- Part 6: Powders and Foams
- SYNTHESIS OF TiN NANO-COMPOSITE POWDER BY HIGH-ENERGY BALL MILLING OF TiH2 UNDER NITROGEN ATMOSPHERE
- Application of AFM in Morphology Determination of Powder Material
- Effects of Thermal Processing on Closed-Cell Aluminium Foams
- Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams under Drop Weight Impact
- Deformation Mechanisms of Closed Cell-Aluminium Foams during Drop Weight Impact
- Part 7: Minerals
- INDUSTRIAL USE OF BRAZILIAN BENTONITE MODIFIED BY MILD ACID ATTACK
- Mullitization Characteristics and Sinterability of Kyanite in Ceramic Preparation
- Ore Dressing and Technological characterization of Palygorskite from Piauí/Brazil for applications as adsorbent of heavy metals
- TECHNOLOGICAL CHARACTERIZATION OF WASTE FROM GOLD MINING DAM
- Synthesis and Characterization of Sodalite and Cancrinita from Kaolin
- Part 8: Ferrous Metals
- Effects of Alumina and Magnesia on Microstructure and Mineralogy of Iron Ore Sinter
- Isothermal Reduction Kinetics of CaO·2Fe2O3 by Thermogravimetric Analysis
- Phase Transformation of MnO2 and Fe2O3 Briquettes Roasted Under CO-CO2 Atmospheres
- Contact Angle of Iron Ore Particles with Water: Measurements and Influencing Factors
- Important Factors to Consider in FIB Milling of Crystalline Materials
- Part 9: Material Processing and Corrosion
- Corrosion Behavior of Super-Ferritic Stainless Steels in NaCl media
- Effect of bromide ions on the pitting corrosion of hafnium in anhydrous t-butanol and acetonitrile
- Compression Behavior of Semi-Closed Die Forged AZ80 Extrusion
- Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique
- Part 10: Method Development
- Development of A New Recycling Process of PGM from Metal-supported Catalyst Using Complex Oxide
- Part 11: Composites
- High thermal conducting composites using percolation theory
- SORPTION CHARACTERISTICS OF LOW DENSITY POLYETHYLENE/KOLA NUT COMPOSITE
- Residual Stress Analysis within Steel Encapsulated Metal Matrix Composites Via Neutron Diffraction
- Tensile Behavior of Epoxy Matrix Composites Reinforced With Pure Ramie Fabric
- Hemp Fiber Density Using the Pycnometer Technique
- Preparation and Characterization of Clay Exfoliation and Vegetal fibre on Properties of Recycled Low Density Polyethylene (rLDPE)
- Part 12: Ferrous Metals
- Estimation of Dislocation Density in Metals from Microhardness Test
- Part 13: Welding and Solidification
- Interfacial strength characterization in a high-modulus low-density steel-based Fe-TiB2 composite
- Part 14: Materials Extractions
- Leaching of Copper-Cobalt Tailings from the Democratic Republic of Congo
- OPTIMUM OPERATING CONDITIONS FOR EXTRACTION OF LIGNIN PRECURSORS FROM PALM FRUIT BUNCH
- SELECTION ON THE PROCESS FOR ENRICHING GOLD FROM REFRACTORY GOLD ORES BY SMELTING
- SELECTION ON THE PROCESS FOR REMOVING AND RECOVERING ANTIMONY FROM ANTIMONIAL REFRACTORY GOLD ORES
- Upgrading of Copper and Cobalt from the Democratic Republic of Congo Tailings
- CHARACTERIZATION OF SPENT PRINTED CIRCUIT BOARDS FROM COMPUTERS
- Study of the Effect of the Initial Nucleation Mechanism of Lead Anode Oxidation Film on Internal Stress in Chromic Acid Electrolyte
- Part 15: Poster Session
- Addition of Cellulose Nanofibers in Reactive Powder Concrete
- ADVANCED ION COLUMN SOLUTION FOR LOW ION DAMAGE CHARACTERIZATION AND ULTRA-FINE PROCESS
- Application of Membrane Separation Technology in Wastewater Treatment of Iron and Steel Enterprise
- Brillouin Scattering Study on Elastic Properties of Bulk hcp ZnO Single Crystal
- Characteristics of stamp charging coke and top charging coke
- Characterization and leaching proposal of Ag ( I) from a Zn concentrate
- Characterization and Mechanical Properties of Additively Manufactured Stainless Steel 316L
- CHARACTERIZATION OF MERCURY JAROSITE
- Characterization of steel production dust and their use in structural ceramics
- CHARPY TOUGHNESS BEHAVIOR OF JUTE FABRIC REINFORCED POLYESTER MATRIX COMPOSITES
- Chemical and Mineralogical Characterization of a Mixed Sulphide Ore at Zimapan, Hidalgo
- Contribution to the ß relaxation study of the HDPE, LDPE and LLDPE
- Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES
- Effects of wet grinding on the structure and granularity of biological origin aragonite and its polymorphic transformation into calcite
- EVALUATION OF BALLISTIC ARMOR BEHAVIOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS
- EVALUATION OF THE POZZOLANIC ACTIVITY OF RESIDUE FROM THE PAPER INDUSTRY
- EVALUATION OF THE PROPERTIES OF THE ADHESIVE MORTAR IN THE FRESH STATE WITH ADDITION OF GLASS WASTE
- Experimental Evaluation of the Influence of Mortar’s Mechanical Properties on The Behavior of Clay Masonry
- Influence of Operation Conditions on Normal Stress and Flow Pattern of Burden Materials in Blast Furnace Based on Discrete Element Method
- Polymer Blend based on recycled polyethylene and ethylene vinyl acetate copolymers reinforced with natural fibers from agricultural wastes
- Preliminary study of the effect of stirring rate, temperature and oxygen pressure on the leach rate of copper powder, generated by grinding of printed circuit boards of computer
- Preparation and Characterization of Polyethylene Nanocomposites with Clay and Silver Nanoparticles
- Production of concrete interlocking blocks with partial replacement of sand in bulk by waste glass machined
- Reactive Powder Concrete Production with the Addition of Granite Processing Waste
- Research on the reason of the different type of chloride forming in the process of blast furnace ironmaking
- Stress and Deformation Analysis of Hot Blast Stove Piping System
- Stress and Deformation Analysis of Top Combustion Hot Blast
- Stove Shell
- STUDY OF CALCINED MIXTURES FROM INDUSTRIAL RESIDUES FOR PRODUCTION OF AGGLOMERATES
- STUDY OF SYNERGISTIC EFFECT OF LIGHT STABILIZER ADDITIVE, CONVENTIONAL AND NANOPARTICLES, APPLIED TO POLYETHYLENE FILMS SUBMITTED TO ULTRAVIOLET RADIATION
- Study of the effect of surface liquid flow during column flotation of mining tailing of the Dos Carlos dam
- STUDY ON BENDING TEST ON CONCRETE STRUCTURAL USE CRUMB RUBBER AS SUBSTITUTE IN FINE AGGREGATE
- Synthesis and structural characterization of BaTiO3 doped with Gd3+
- Texture analysis and anisotropic properties of a rolled CuZn36 brass alloy
- The influence of titanium content on the sinter ore phase structure and the crack
- The use of Network Simplex method for planning the incorporation of recycled paper mill sludge in manufacturing of ceramic bodies
- USE OF ALKALINE SOLID WASTES FROM KRAFT PULP AND PAPER MILLS, DREGS AND GRITS IN CEMENT PRODUCTION
- Wood-to-concrete joints using steel connectors: experimental evaluation.
