Light Metals 2017
.
| Συγγραφή απο Οργανισμό/Αρχή: | |
|---|---|
| Άλλοι συγγραφείς: | |
| Μορφή: | Ηλεκτρονική πηγή Ηλ. βιβλίο |
| Γλώσσα: | English |
| Έκδοση: |
Cham :
Springer International Publishing : Imprint: Springer,
2017.
|
| Σειρά: | The Minerals, Metals & Materials Series,
|
| Θέματα: | |
| Διαθέσιμο Online: | Full Text via HEAL-Link |
Πίνακας περιεχομένων:
- Part 1: Alumina & Bauxite: Digestion and Calcination
- CFB Alumina Calciners - New and Future Generation Opportunities for Green Field Refineries
- Evolutional Development of Alkaline Aluminosilicates Processing Technology
- Characterization and Ore Dressing of Bauxite from Brazil
- Process Optimization for Diaspore Digestion Equilibrium using Response Surface Methodology
- Thermodynamic analysis and formation law of Q phase of calcium aluminate clinker
- Leaching Behavior of Alumina from Smelting Reduction Calcium Aluminate Slag with Sodium Carbonate Solution
- Part 2: Alumina & Bauxite: Bauxite Residues Technology
- Security Disposal and Comprehensive Utilization of Bauxite Residues
- Bauxite Residue Amendment Through the Addition of Ca and OR Mg Followed By Carbonation
- Application of Tricalcium Aluminate Instead of Lime for the recovery of aluminum in Middle-low Grade Bauxite in Calcification-Carbonization Process
- Low Temperature Reduction of Hematite in Red-Mud to Magnetite
- Recovery of Iron-, Titanium-bearing Constituents from Bauxite Ore Residue via Magnetic Separation Followed by Sulfuric Acid Leaching
- Processing diasporic red mud by the calcification-carbonation method
- Research of Flocculants and Dewatering Additives for Filtration of Red Mud
- Characterization of activated alumina production via spray pyrolysis
- Part 3: Alumina & Bauxite: Non-traditional Resources
- New process research on aluminium production from non-traditional aluminum resource by microwave chlorination
- Opportunities of pseudoboehmite processing from aluminum content raw material at sintering method
- Chemical Alumina Preparation by Using High Alumina Content Fly Ash
- A Novel Process of Alumina Production from Low-grade Bauxite Containing Sulfur
- Iron separation from bauxite through smelting-reduction process
- Thermodynamic behavior of lime desulfurization in sodium aluminate solution
- Part 4: Alumina & Bauxite: Poster Session
- A study on optimization of processing parameters for synthesis of calcium hydroaluminosulfate using response surface methodology
- Part 5: Aluminum Alloys, Processing and Characterization: Alloy Development and Applications
- Design of New 6xxx Series Al Alloy Using the CALPHAD Thermodynamic Database
- Study of an Al-Ca Alloy with Low Young's Modulus
- Production Of 3004 Aluminum Alloy Sheet For Structural Applications From Twin Roll Casting
- Aluminum alloys with tailored TiB2 particles for composite applications
- Development of low expansion and high strength aluminium hybrid composite
- Part 6: Aluminum Alloys, Processing and Characterization: Solidification and Casting
- A model for a-Al(Mn,Fe)Si crystals
- Casting Characteristics of High Cerium Content Aluminum Alloys
- In-situ observation of fragmentation of primary crystals by ultrasonic cavitation in water
- The enhancement of mechanical properties of A356 alloy solidified at lower cooling rate via effectively grain refinement
- Secondary Aluminum Alloys Processed by Semisolid Process for Automotive Application
- Integrated casting-extrusion of an AA6082 aluminum alloy
- On Porosity Formation in Al-Si-Cu Cast Alloys
- Part 7: Aluminum Alloys, Processing and Characterization: Characterization
- Algorithm for Finding the Correlation between the Properties of Wrought Aluminum Alloys, the Chemical Composition and the Processing Parameters
- Analysis of an aluminium alloy containing trace elements
- Determination of aluminum oxide thickness on the annealed surface of 8000 series aluminum Foil by Fourier Transform Infrared Spectroscopy
- Test Uncertainty in Chemical Composition Analysis
- Real Time 3D Imaging and Laser Marking System for Industrial Traceability
- Production and Certification of Arconic Certified Reference Materials
- Characterization of Large Strain Extrusion Machining (LSEM) of AA7050
- Interaction between fatigue micro-cracks and inclusion/matrix interface in high-strength Al alloy
- Influence of trace element additions on Fe bearing intermetallic solidification of a 6063 Al alloy
- Part 8: Aluminum Alloys, Processing and Characterization: Heat Treatment
- THE OPTIMIZATION OF THE HOMOGENIZATION TREATMENT OF AA7075
- Precipitation modeling and validation of Al-5%Cu-0.4%Mn alloy using quench factor analysis
- Young’s modulus of Al-Si-Mg-Cu based alloys under different heat treatment processes
- Intergranular Corrosion Investigation on EN-AW 6082 Redraw Rod
- The influence of process parameters and thermomechanical history on streaking defects in AA6060 extrusions
- Effect of Heat-treatment on Microstructure and Mechanical Properties of Sonicated Multicomponent AlMgSiCuZn Alloy
- Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys
- Part 9: Aluminum Alloys, Processing and Characterization: Plasticity and Mechanical Behavior
- New Yield Criterion for Description of Plastic Deformation of Face-Centered Cubic Single Crystals
- Quantifying As-cast and Homogenized AA7050 Mechanical Properties through Compression Testing
- Determining a Stable Texture Condition Under Complex Strain Path Deformations in Face Centered Cubic Metals
- Microstructural transition and elevated temperature tensile properties of modified Al-Si-Cu-Mg alloys
- Effects of alloying elements on anneal-hardening behavior of aluminum alloy foils
- Increasing strength and corrosion resistance of AlMgSi alloys by tailor-made thermomechanical processing
- Microstructural optimization of a High Mechanical Properties (HMP) aluminum alloy by using CobaPress™ process
- Cyclic Stress-strain Behavior and Low Cycle Fatigue Life of AA6061 Aluminum Alloy
- Part 10: Aluminum Alloys, Processing and Characterization: Poster Session
- Corrosion of Al-Mg Alloys in Ethanol
- Warm pressing of Al powders: an alternative consolidation approach
- Part 11: Aluminum Reduction Technology: Dry Scrubbing, Alumina Transport and Dissolution
- Spreading of Alumina and Raft Formation on the Surface of Molten Cryolite
- Fluoride Capture Capacity of SGA: The Interplay between Particle and Pore Size Distribution
- Predictive Formulae for the Competitive Adsorption of HF and SO2 on Smeltergrade Alumina Used in Dry Scrubbing Applications
- Pot Gas Treatment at High Gas Temperatures
- Influence of Handling Parameter on Powder Properties
- Part 12: Aluminum Reduction Technology: Anode Effect and PFC Emissions
- Preventive Treatment of Anode Effects Using On-Line Individual Anode Current Monitoring
- Reduction in EGA Jebel Ali Potroom GHG Emissions
- Partial Anode Effect in a Two-Compartment Laboratory Alumina Reduction Cell
- Co-evolution of Carbon Oxides and Fluorides during the Electrowinning of Aluminium with Molten NaF-AlF3-CaF2-Al2O3 Electrolytes
- Part 13: Aluminum Reduction Technology: Cell Lining Materials
- Chemical stability of thermal insulating materials in sodium vapour environment
- AGING OF INSULATING LININGS IN ALUMINIUM ELECTROLYSIS CELLS
- Cathode Wear Based on Autopsy of a Shut down Aluminium Electrolysis Cell
- SPL Recycling and Re-Processing
- Alternative applications of SPL: Testing ideas through experiments and mathematical modeling
- Part 14: Aluminum Reduction Technology: Cell Voltage and Pot Control
- Clustering Aluminium Reduction Cells
- Application of Multivariate Statistical Process Control with STARprobeTM Measurements in Aluminium Electrolysis Cells
- Study Of Impact Of The Anode Slots On The Voltage Fluctuations Of Aluminium Electrolysis Cell Using Bubble Layer Simulator
- Detecting, Identifying and Managing Systematic Potline Issues with Generation 3 Process Control
- Predicting Instability and Current Efficiency of Industrial Cells
- Part 14: Aluminum Reduction Technology: Electrolyte and Fundamentals
- Sodium in Aluminium as a Cell Performance Indicator: A Quantitative Framework
- Bauxite processing via chloride route to produce chloride products and subsequent electrolysis of aluminium
- chloride to produce aluminium metal
- Stability of Chlorides in Cryolitic Electrolyte
- Role of Heat Transfer in the Formation of Carbon Oxides in Smelting Cells
- Part 15: Aluminum Reduction Technology: Modelling and Cell Design
- Improving The Understanding Of BUSBAR Design And Cell MHD Performance
- LES turbulence modeling approach for molten aluminium and electrolyte flow in aluminum electrolysis cell
- MHD of Large Scale Liquid Metal Batteries
- Low energy consumption cell designs involving copper inserts and an innovative busbar network layout
- Minimizing Cathode Voltage Drop by Optimizing Cathode Slot Design
- Part 16: Aluminum Reduction Technology: Potroom Operations
- Crane Electrical Isulation Monitoring in Potlines: New CANDI 4.0 Development
- Surviving an Extended Power Outage after a Break Down in the Sub Station
- Retrofit of Damaged Corner Risers by Means of Bolted Connections
- Theory and Practice of High Temperature Gas Baking Technology for Alumninium Electrolysis Cells
- Part 17: Aluminum Reduction Technology: Technology Development
- IMPLEMENTATION OF D18+ CELL TECHNOLOGY AT EGA JEBEL ALI SMELTER
- Integrating a New Smelter Supervision HMI in Existing Control Systems at ALBRAS
- DX+ ULTRA – EGA HIGH PRODUCTIVITY, LOW ENERGY CELL TECHNOLOGY
- Potroom HF Emission Reduction by Anode Inert Tray Technology Performances of ALRO Industrial 1st of Class
- Enabling efficient heat recovery from aluminium pot gas
- The Successful Implementation of AP40 Technology at Kitimat
- Part 18: Cast Shop Technology: Continuous Strip Casting
- Effect of grain refiners on aluminum twin roll casting process
- Influence of Process Conditions on Segregation Behavior in Twin-Roll Casting of an AlFeSi alloy
- Effect of Magnesium Content on Microstructure and Mechanical Properties of Twin-Roll Cast Aluminum Alloys
- Influence of sticking on the roll topography at twin-roll casting of aluminum alloys
- Material Surface Roughness Change in Twin Roll Cas.
