TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings

This collection features papers presented at the 146th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.

Λεπτομέρειες βιβλιογραφικής εγγραφής
Συγγραφή απο Οργανισμό/Αρχή: SpringerLink (Online service)
Άλλοι συγγραφείς: & Materials Society, The Minerals, Metals (Επιμελητής έκδοσης, http://id.loc.gov/vocabulary/relators/edt)
Μορφή: Ηλεκτρονική πηγή Ηλ. βιβλίο
Γλώσσα:English
Έκδοση: Cham : Springer International Publishing : Imprint: Springer, 2018.
Έκδοση:1st ed. 2018.
Σειρά:The Minerals, Metals & Materials Series,
Θέματα:
Διαθέσιμο Online:Full Text via HEAL-Link
Πίνακας περιεχομένων:
  • Part 1. 2018 Symposium on Functional Nanomaterials: Discovery and Integration of Nanomaterials
  • 2-D Nanosheets and Rod-like WO3 Obtained via Chemical Precipitation Method for Detecting Formaldehyde
  • Electrochemical Fabrication of  micro/nanoporous Copper Film by Electrosynthesis-dealloying of Cu-Zn Alloy in Eutectic Deep Solvent
  • Electrosynthesis of CuNP'S from E-Waste
  • Experimental Investigation of the Effect of ZnO-Citrus Sinensis Nano-additive on the Electrokinetic Deposition of Zinc on Mild Steel in Acid
  • Obtaining of Iron Nanoparticles (Fe NP's) for Treatment of Water Contaminated with As
  • Synthesis of Gold Nanoparticles Using the Extract of Sedum Praeltum and its Deposition on a Ceramic Substrate
  • Part 2. Accident Tolerant Fuels for Light Water Reactor
  • Effects of Ce Addition on the Microstructure and Mechanical Properties of Accident-tolerance Fe-Cr-Al Fuel Cladding Materials
  • Part 3. Additive Manufacturing of Metals: Fatigue and Fracture
  • Evaluation of The Mechanical Properties of 15Cr-5Ni Stainless Steel Produced by Direct Metal Laser Sintering
  • Creep and Thermomechanical Fatigue of Functionally Graded Inconel 718 Produced  by Additive Manufacturing
  • Part 4. Additive Manufacturing: Building the Pathway towards Process and Material Qualification
  • Defect Detection in LENS AM Using In Situ Thermal Camera Process Monitoring
  • Part 5. Advanced High-strength Steels
  • Studying Hydrogen Embrittlement in Nano-twinned Polycrystalline Fe-12.5Mn-1.2C Austenitic Steel
  • Non-metallic Inclusion and their Effect on Fatigue Strength for CAS-hardened Carbon Steel in Gears
  • Influence of Austenitizing Temperature and Time on Microstructure and Mechanical Properties of an YP460 Grade Crack Arrest Steel
  • The Evolution of Microstructure of an High Ni HSLA X100 Forged Steel Slab by Thermomechanical Controlled Processing
  • Effects of Matrix Microstructure on the Nanoscale Precipitation and Precipitation Strengthening in an Ultra-high Strength Steel
  • The Technology Study of Silicon Reduction of Chromite Powder in Microwave Field
  • Part 6. Advanced Magnetic Materials for Energy and Power Conversion Applications
  • Influence of Co-doping on the Crystal Structure, Magnetocaloric Properties and Elastic Moduli of the La(Fe,Si)13 Compound
  • Part 7. Advanced Real Time Optical Imaging
  • Mass Transfer in High-temperature Laser Confocal Microscopy
  • Current State Art of Double Hot Thermocouple Technology-Novel Way for the Study of Mold Flux High-temperature Properties
  • Part 8. Algorithm Development in Materials Science and Engineering
  • A Dislocation-based Finite Element Modelling of Hydrogen Embrittlement in High-strength Steel Alloys
  • Part 9. Biodegradable Materials for Medical Applications
  • Comparative Study on Corrosion Behavior WE33 in Immersion and Polarization Influenced by Heat Treatment
  • Metal Injection Molding (MIM) of Mg-alloys for Biomedical Applications
  • Microstructure and Mechanical Properties of Mg-Gd Alloys as Biodegradable Implant Materials
  • Study on Polylactide-coconut Fibre for Biomedical Applications
  • Visualisation of Implant Failure by Synchrotron Tomography
  • Part 10. Biological Materials Science
  • 3D Full-field Mechanical Measurement of Shoulder Bones under Implant Loading
  • The Influence of Plastic Deformation Mechanisms on the Collagen Formation in Osteoblast Cells
  • Part 11. Bulk Metallic Glasses XV
  • Probabilistic Modelling and Simulation of Microstructural Evolution in Zr Based Bulk Metallic Glass Matrix Composites during Solidification
  • Part 12. Computational Design and Simulation of Materials (CDSM 2018):  Atomistic Simulations
  • The Adhesion Force in Nano-contact during Approaching and Retrieving Processes
  • Atomistic Simulations of Carbon Diffusion and Segregation in a-Iron Grain Boundaries
  • Part 13. Computational Design and Simulation of Materials (CDSM 2018):  Meso/Macroscale Simulations
  • Microstructure Prediction for TMW-4M3 during Heat Treatment
  • Study on the Effects of Contact Pressure and Process Parameters on the Casting-mold Interfacial Heat Transfer in Squeeze Casting
  • Part 14. Computational Design and Simulation of Materials (CDSM 2018): Computational Design of Materials
  • Study on the Effect of Applied Pressure on Directional Dendritic Growth by In-situ Observation
  • Modeling of Solute-dependent Fluidity and Hot Tearing Sensitivity of Conductive Aluminum Alloys
  • Coupling Void Coalescence Criteria in Finite Element Models: Application to Tensile Test
  • Design of a New Multi-element Beta Titanium Alloy Based on D-electron Method
  • Part 15. Computational Materials Science and Engineering for Nuclear Energy
  • Effects of Oxygen on the Density of States and Elastic Properties of Hafnium-First Principles Calculations
  • Morphological Study of Dispersion Phases in Heterogenous Waste Form Materials for Efficient Nuclear Waste Containment
  • Part 16. Computational Thermodynamics and Kinetics
  • Compare the Energies of Different Oxofuoraluminium Structures in Aluminium Production Process
  • Manganese Influence on Equilibrium Partition Coefficient and Phase Transformation in Peritectic Steel
  • Mathematical Modeling on the Fluid Flow and Desulfurization during KR Hot Metal Treatment
  • Part 17. Coupling Experiments and Modeling to Understand Plasticity and Failure
  • In-situ Characterization of Microstructural Damage in QP980 Steel
  • Part 18. Deformation and Damage Mechanisms in High Temperature Ni, Co and Fe-based Superalloys
  • Prediction of Incipient Melting Map and Features of Ni-base Superalloys Using Molecular Orbital Method
  • Part 19. Dynamic Behavior of Materials VIII
  • Mechanical Properties and Shear Localization of High Entropy Alloy CoCrFeMnNi Prepared by Powder Metallurgy
  • Effect of Phase Transformation on High Temperature Dynamic Flow Stresses of CP-Ti
  • Shock-induced Mechanical Response and Substructural Evolution of Ti-6Al-4V Alloy
  • The Use of Circumferentially Notched Tension Specimen for Fracture Toughness Assessment of High Strength Steels
  • A Low-Cost, Laboratory-Scale Method to Identify Regions of Microstructural Changes in Response to Dynamic Loading Conditions
  • Part 20. Environmentally Assisted Cracking: Theory and Practice
  • Environment Induced Degradation in Maraging Steel Grade 18Ni1750
  • Part 21. Fatigue in Materials: Fundamentals, Multiscale Modeling and Prevention
  • Thermal Fatigue Behavior of High Cr Roller Steel
  • Influence of Cold Spray on the Enhancement of Corrosion Fatigue of the AZ31B Cast Mg Alloy
  • Part 22. Fracture: 65 Years after the Weibull Distribution and the Williams Singularity
  • High Temperature Cracking Damage of Calcium Aluminate Cements
  • On the Experimental Evaluation of the Fracture Toughness of Shape Memory Alloys
  • Part 23. Frontiers in Solidification Science and Engineering
  • Inoculation in Lab Scale Low Alloyed Steel Castings
  • Phase-field Modelling of Intermetallic Solidification
  • Analysis of Formability of Glassy Alloys by Surface Heating under Convective Conditions
  • Study on the Formation and Control of TiN Inclusion in Mushy Zone for High Ti Microalloyed Steel
  • Part 24. General Poster Session
  • Additive Manufacturing of Epoxy Resin Matrix Reinforced with Magnetic Particles
  • Admixture Optimization in Concrete Using Superplasticizers
  • Influence of Cold Spray on the Microstructure and Residual Stress of Resistance Spot Welded Steel-Mg
  • Part 25. High Entropy Alloys VI
  • Development of Oxidation Resistant Refractory High Entropy Alloys for High Temperature Applications: Recent Results and Development Strategy
  • First-principles Calculations of Stacking Fault Energies in Quinary High-entropy Alloy Systems
  • Synthesis of FeCrVNbMn High Entropy Alloy by Mechanical Alloying and Study of their Microstructure and Mechanical Properties
  • Part 26. Integrative Materials Design III: Performance and Sustainability
  • Magnesium Based Metal Matrix Nanocomposites - Processing and Properties
  • Part 27. Materials and Fuels for the Current and Advanced Nuclear Reactors VII
  • Investigation of Tin as a Fuel Additive to Control FCCI
  • Part 28. Mechanical Behavior at the Nanoscale IV
  • Mechanical Properties of Rapidly Solidified Ni5Ge3 Intermetallic
  • Part 29.
  • Mechanical Characteristics and Application Properties of Metals and Non-metals for Technology: An EPD Symposium in Honor of Donato Firrao
  • Production of Cu2O Powder Using Electrodeposition Method
  • Alumina Feeding System Changes in Aluminum Electrochemical Cell with D18 Technology for Energy Efficiency (Case Study: Almahdi- Hormozal Aluminum Smelter)
  • Hot Ductility of X70 Pipeline Steel in Continuous Casting
  • Ductile Fracture Assessment of Hot Isostatically Pressed Stainless Steel Using 3D X-ray Computed Tomography
  • Thermo-Calc of the Phase Diagrams of the Nb-N System
  • Part 30. Multi-material Additive Manufacturing: Processing and Materials Design
  • Development of Novel Squeeze Cast High Tensile Strength Al-Si-Cu-Ni-Sr Alloys
  • Part 31. Nanocomposites V: Structure-Property Relationships in Nanostructured Materials
  • Carbon Nanocomposite for Reliable Seal Applications in High- temperature, High-pressure, Corrosive Environments
  • The Dielectric Behavior in Reduced Graphene Oxide /Polymer Composites with a Segregated Structure
  • Part 32. Phase Transformations and Microstructural Evolution
  • Solid State Phase Transformation Mechanism in High Carbon Steel under Compressive Load and with Varying Cr Percent
  • Microstructure Characterization of Aged Heat Resistant Steels
  • Sublimation and Self Freezing of Planar Surfaces in Rarefied Atmospheres
  • Effect of Precipitation on Creep Properties of Ferritic Steels
  • Microstructural Evolution of a New Beta Titanium Alloy during the Beta Annealing, Slow Cooling and Aging Process
  • Part 33. Powder Metallurgy of Light, Reactive and Other Non-ferrous Metals
  • A Review of the Preparation Methods of WC Powders
  • Influence o.