| 505 |
0 |
|
|a Behn, C. and Kraml, J: Gait Transitions in Artificial Non-standard Snake-like Locomotion Systems Using Adaptive Control -- Breńkacz, Ł., Żywica, G., Drosińska-Komor, M. and Szewczuk-Krypa, N: The Experimental Determination of Bearings Dynamic Coefficients in a Wide Range of Rotational Speeds, Taking into Account the Resonance and Hydrodynamic Instability -- Burdzik, R: Analysis of Rail Vibration Signal Time and Frequency Structures Generated by Different Mechanisms -- Chmielewski, A., Gumiński, R., Mydłowski, T., Małecki, A. and Bogdziński, K: Model Based Research on ICE Engine Powered by Alternative Fuels -- Chmielewski, A., Możaryn, J., Gumiński, R., Bogdziński, K. and Szulim, P: Experimental Evaluation of Mathematical and Artificial Neural Network Modeling of Energy Storage System -- Csukas, E.-S. and Duma, V.-F: Finite Element Analysis of a Configuration of Optomechatronic Choppers with Rotational Shafts -- Danek, W. and Pawlak, M: Charpy Impact Testing Machine in Modeling of Vehicle Frontal Crash with Street Lights -- Dutkiewicz, M: Interaction of Bridge Cables and Wake Behind in the Vortex Induced Vibrations -- Dyk, Š., Byrtus, M. and Smolík, L: Steady-state Behaviour of the Jeffcott Rotor Comparing Various Analytical Approaches to the Solution of the Reynolds Equation for Plain Journal Bearing -- Falborski, T., Sołtysik, B. and Jankowski, R: Numerical Investigation on Dynamic Performance of a Multi-storey Steel Structure Model and Comparison with Experimental Results -- Fiebig, W: Accumulation of the Energy in Mechanical Resonance -- Górka, J. and Jamrozik, W: Application of Time-frequency Methods for Assessment of Gas Metal Arc Welding Condition -- Grzelczyk, D., Biesiacki, P., Mrozowski, J. and Awrejcewicz, A: A 3-link Model of a Human for Simulating a Fall in Forward Direction -- Grzelczyk, D. and Awrejcewicz, J: Reflectance and Transmittance of Cholesteric Liquid Crystal Sandwiched Between Polarizers -- Herisanu, N. and Marinca, V: Analysis of Nonlinear Dynamic Behavior of a Rotating Electrical Machine Rotor-Bearing System Using Optimal Auxiliary Functions Method -- Jarzębowska, E., Augustynek, K. and Urbaś, A: Development of a Computational Based Reference Dynamics Model of a Flexible Link Manipulator -- Jasionowski, R. and Kostrzewa, W: Optimization of Geometry of Cavitational Tunnel Using CFD Method -- Kik, T., Moravec, J. and Nováková, I: Application of Numerical Simulations on 10GN2MFA Steel Multilayer Welding -- Komorski, P., Nowakowski, T., Szymanski, G. M. and Tomaszewski, F: Application of Time-frequency Analysis of Acoustic Signal to Detecting Flat Places on the Rolling Surface of a Tram Wheel -- Kosiara, A., Chołodowski, J. and Skurjat, A: Development of a Prototype Dynamic Weighing System for Single Bucket Excavator -- Kralikova, R., Badida, M., Sobotova, L. and Badidova, A: Design of Illumination and Lighting Visualization by Simulation Methods -- Maciąg, P., Malczyk, P. and Frączek, J: Optimal Design of Multibody Systems Using the Adjoint Method -- Mirosław, T. and Zawadzki, A: Non-linear Modelling of Human Body Dynamic -- Mitoraj, R. and Szczotka, M: Dynamics of a Portable Module Handling System -- Palechor, E. U. L., Machado, M. R., de Morais, M. V. G. and Bezerra, L. M: Dynamic Analysis of a Beam with Additional Auxiliary Mass Spatial via Spectral Element Method -- Pałczyński, T: Influence of Air Temperature on Dynamic Properties of Pipes Supplied with Pulsating Flow -- Pałczyński, T. and Łagodziński, J: Model of Kinetic Energy Recuperation System for City Buses -- Saków, M., Marchelek, K., Parus, A., Pajor, M. and Miądlicki, K: Signal Prediction in Bilateral Teleoperation with Force-Feedback -- Shahlaei-Far, S. and Balthazar, J. M: Method of Direct Separation of Motions Applied to a Non-Ideal Electromechanical Pendulum System -- Shatskyi, I. and Perepichka, V: Problem of Dynamics of an Elastic Rod with Decreasing Function of Elastic-Plastic External Resistance -- Shatskyi, I., Popadyuk, I. and Velychkovych, A: Hysteretic Properties of Shell Dampers -- Svoboda, M., Schmid, V., Soukup, J. and Sapieta, M: Modal Analysis of the Vehicle Model -- Skurjat, A. and Kosiara, A: Directional Stability Control of Body Steer Wheeled Articulated Vehicles -- Zdziebko, P., Martowicz, A. and Uhl, T: Influence of the Mechanical Properties of Pantograph Structural Parts on Its Interaction with a Catenary -- Urbanowicz, K. and Firkowski, M: Modelling Water Hammer with Quasi-steady and Unsteady Friction in Viscoelastic Pipelines -- Warczek, J., Burdzik, R. and Konieczny, Ł: The Concept of Autonomous Damper in Vehicle Suspension -- Wątroba, P., Pawlak, M. and Gąsiorek, D: Validation of the Numerical Model of Impuls I Electric Multiple Unit Driver's Cab -- Wojnicz, W., Zagrodny, B., Ludwicki, M., Syczewska, M., Mrozowski, J. and Awrejcewicz, J: Approach for Determination of Functioning of Lower Limb Muscles -- Wos, P. and Dindorf, R: Modeling and Control of Motion Systems for an Electro-hydraulic Tripod Manipulator -- Zarodnyuk, A. and Cherkasov, O: Support Reaction in the Brachistochrone Problem in a Resistant Medium -- Szlachetka, O., Jaworski, J. and Chalecki, M: Free Vibration of Cantilever Bars Having a Shape of Solid and Hollow Curvilinear Truncated Cone -- Zelei, A., Molnar, C. A. and Insperger, T: Four-bar Mechanism Substitution for Balance Board Experiments: A Parametric Study -- Zemanova, A., Plachy, T., Schmidt, J., Janda, T., Zeman, J. and Sejnoha, M: Numerical and Experimental Modal Analysis of Laminated Glass Beams -- Żardecki, D. and Dębowski, A: Methods of Simulation Investigations of Non-linear Vibrations in the Steering System of a Motorcycle.
|
